TECHNICAL DATA SHEET
Wolver Antifreeze & Coolant Concentrate WG11 (Blue)
SPECIFICATIONS
SAEJ1034|ASTMD3306 / D4985
OEM APPROVALS:
PORSCHE | Case | Caterpillar | New Holland | Volvo | BMW GS 9400 | BS 6580 | Cummins 85T8-2 | Cummins CES 14603 | Detroit Diesel 7SE298 | John Deere 8650-5 | MACK 014617004 | MAN 324 NF | MB 325.0 | MB 325.2 | MTU (MTL 5048) | Opel GM QL 130100 | Saab 6901 599 | VW/Audi/Seat/Skoda TL 774-C (G11)
ADDITIONAL INFORMATION:
Engine Type: Diesel | Gasoline
Purpose: Service products | Passenger vehicle | Commercial transport | Agricultural machinery
Packaging Size: 1.5L | 208L | 60L | 5L
Purpose: Service products | Passenger vehicle | Commercial transport | Agricultural machinery
Packaging Size: 1.5L | 208L | 60L | 5L
DESCRIPTION:
Wolver Antifreeze & Coolant WG11 Concentrate is a high quality concentrate coolant for modern gas and diesel engines of cars, trucks, agricultural machinery and stationary engines.
Characteristics:
Powerful and long-lasting protection against corrosion for all parts of the cooling system;
Maintenance-free frost and overheating protection with a higher boiling point;
Extended coolant life;
Avoidance of cavitation damages;
Compatibility with varnishes;
Compatibility with hose and sealing materials;
Avoidance of sediments, which can cause radiator plugging;
Avoidance of foaming.
Application:
Should be mixed before pouring into the cooling circuit with water at a concentration of 33 to max. 60 vol%. A 50/50 ratio is recommended: 50 vol% in water gives -38°C protection, 33 vol% gives -18°C.
Miscibility:
Mixing with other coolants is not recommended.
Characteristics:
Powerful and long-lasting protection against corrosion for all parts of the cooling system;
Maintenance-free frost and overheating protection with a higher boiling point;
Extended coolant life;
Avoidance of cavitation damages;
Compatibility with varnishes;
Compatibility with hose and sealing materials;
Avoidance of sediments, which can cause radiator plugging;
Avoidance of foaming.
Application:
Should be mixed before pouring into the cooling circuit with water at a concentration of 33 to max. 60 vol%. A 50/50 ratio is recommended: 50 vol% in water gives -38°C protection, 33 vol% gives -18°C.
Miscibility:
Mixing with other coolants is not recommended.
TYPICAL PROPERTIES:
| Characteristic | Value |
|---|---|
| Relative density at 15.6 °C, kg/m³ | 1118 |
| pH value 50% vol aqueous solution, - | 8.4 |
| Freezing point 50% vol aqueous solution, °C | -38 |
| Colour, - | blue |