TECHNICAL DATA SHEET
Wolver Modelux EP3
SPECIFICATIONS
DINKP2K-30|ISOL-XCCEB 2|NLGI3
ADDITIONAL INFORMATION:
Purpose: Greases
Packaging Size: 200L
Packaging Size: 200L
DESCRIPTION:
WOLVER MODELUX EP 3 is recommended for lubricating a wide range of friction points, including:
Sliding and rolling guideways;
Ball and universal (cardan) joints;
Gears and other transmissions in industrial equipment.
It is specifically designed for equipment operating under severe conditions that require EP (Extreme Pressure) properties, including environments where the presence of moisture is typical.
Sliding and rolling guideways;
Ball and universal (cardan) joints;
Gears and other transmissions in industrial equipment.
It is specifically designed for equipment operating under severe conditions that require EP (Extreme Pressure) properties, including environments where the presence of moisture is typical.
BENEFITS:
- Wear Reduction: Significantly reduces wear under high or shock loads and vibrations.
- Corrosion Resistance: Provides superior protection against rust and corrosion.
TYPICAL PROPERTIES:
| Characteristic | Value |
|---|---|
| Thickener Type | Lithium (Li) |
| Dropping Point, °C | 200 |
| Worked Penetration at 25°C, 0.1 mm | 240 |
| Effective Viscosity at -20°C, Pa·s | 364 |
| Colloidal Stability, % | 12 |
| Evaporation Loss, % | 1 |
| Corrosion Protection (Metal) | Pass / Withstands |
| Four-Ball Weld Load, N | 2450 |
| Critical Load, N | 980 |
| Load-Wear Index (LWI), N | 392 |
| Wear Scar Diameter (392 N, 1h), mm | 0.43 |
| Shear Strength at 20°C, Pa | 320 |
| Oxidation Stability, mg KOH/g | 0.8 |
| Water Washout Resistance, % | 2.5 |