Wolver Turbo Truck 10W-40 is a HC-Synthetic high performance motor oil for diesel engines of the newest generation. It was specially developed for diesel engines with EURO 5 and EURO 6 standard with after treatment of exhaust gas (particle separator). In order to maintain the functionality after treatment systems and to avoid disturbance, the use of a motor oil with Low SAPS (Low Ash) technology is obligatory.

Wolver Turbo Truck 10W-40 can also be used for diesel engines with Euro 4 and engines with particulate filters in combination with low-sulfur diesel (up to 50 ppm). The reduced values of sulphate, phosphor, and sulphur are guaranteed by selection of especially developed basic oils and additives.

Wolver Turbo Truck 10W-40 has been developed for use in highly charged diesel motors of commercial vehicles in different operating conditions. Being a UHPD oil, it allows largest intervals of oil change (up to 100.000 km – depending on manufacturer recommendations) and can be used in all trucks, construction machines, buses, agricultural vehicles, etc.

Characteristics:

Low Saps (Low Ash) technology;
Highest wear protection;
Exceptional ageing and oxidation stability;
Reduces formation of ageing products at high temperatures;
Low volatilization tendency;
Excellent viscosity-temperature behaviour;
Excellent lubrication in range of highest temperatures.

Application:

Commercial vehicle diesel engines;
with multivalve technology;
with turbocharging;
with catalyst technology;
with particulate filter.

Benefits:

Especially for the latest EURO 5 and EURO 6 engine generation;
Improved economy viability by extended inspections-intervals (up to 100.000 km);
Fuel efficiency by lightrun properties;
Minimum wear at highly strained engines;
All-year operation;
Protection against reflector surface formation;
Guarantee for absolutely clean motors and particle separators.

Typical Properties:

Characteristic	Value
Kinematic viscosity at 100 °C, mm²/s	15.3
Viscosity index, –	150
Pour point, °C	-33
Viscosity CCS at -25 °C, mPa·s	6800
TBN, mgKOH/g	10.3
Flash point , °C	230
Density at 15.6 °C, kg/m³	872

Storage Conditions:

Wolver Turbo Truck 10W-40 is assigned to category 2 of used oils and thus is free for disposal.